Events Types
Client Events
TABLE 353 3rd party client authorization failure event (continued)
Event
Event Code
Severity
Attribute
Displayed on the web
interface
Description
3rd party client session expiration
NOTE
This event is not applicable for vSZ-H.
TABLE 354 3rd party client session expiration event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
3rd party client roaming
NOTE
This event is not applicable for vSZ-H.
TABLE 355 3rd party client roaming event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
210
3rd party client authorization failure
214
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"clientIP"="x.x.x.x", "zoneUUID"="xxxxxx", "userId"="uuid"
3rd party client [{clientIP||clientMac}] of Zone [{zoneName}] on DP
[{{dpName&&dpKey}}] was not authorized.
This event occurs when the 3rd party client on the AP zone session is not
authorized.
3rd party client session expiration
3rdPtyClientSessionExpiration
215
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"clientIP"="x.x.x.x", "zoneUUID"="xxxxxx", "userId"="uuid"
3rd party client [{clientIP||clientMac}] of Zone [{zoneName}] on DP [{dpName||
dpKey}] exceeded the session time limit. Session terminated.
This event occurs when the 3rd party client on the AP zone exceeds the session
time limit, resulting in session termination.
3rd party client roaming
3rdPtyClientRoaming
216
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"clientIP"="x.x.x.x", "zoneUUID"="xxxxxx", "userId"="uuid"
DataPlane [{dpName||dpKey}] detected 3rd party client [{clientIP||clientMac}] in
Zone [{zoneName}] on DP [{dpName||fromDpMac}].
This event occurs when the data plane detects a 3rd party client in the AP zone.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?