Ap Started Location Service; Ap Stopped Location Service; Ap Received Passive Calibration Request - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types
AP LBS Events
TABLE 229 AP failed to connect to LS event (continued)
Event
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Auto Clearance

AP started location service

TABLE 230 AP started location service event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

AP stopped location service

TABLE 231 AP stopped location service event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

AP received passive calibration request

TABLE 232 AP received passive calibration request event
Event
Event Type
Event Code
Severity
Attribute
164
AP failed to connect to LS
704
Major
"apMac"="xx:xx:xx:xx:xx:xx", "url"="", "port"=""
AP [{apName&&apMac}] connection failed to LS: url= [{url}], port= [{port}]
This event occurs when the AP fails to connect to the location based service.
This event triggers the alarm 704, which is auto cleared by the event code 703.
AP started location service
apLBSStartLocationService
705
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "venue"=""
AP [{apName&&apMac}] Start Ruckus Location Service: venue= [{venue}], band=
[{band}]
This event occurs when the AP starts to get the location data.
AP stopped location service
apLBSStopLocationService
706
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "venue"=""
AP [{apName&&apMac}] Stop Ruckus Location Service: venue= [{venue}], band=
[{band}]
This event occurs when the AP stops getting the location data.
AP received passive calibration request
apLBSRcvdPassiveCalReq
707
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "venue"="", "interval"="", "duration, ="", "band"="",
"count"=""
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A