Authentication Succeeded; Authentication Failed; Pseudonym Authentication Succeeded - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm and event, supporting smartzone 3.6
Hide thumbs Also See for Virtual SmartZone High Scale:
Table of Contents

Advertisement

Authentication succeeded

TABLE 307 Authentication succeeded event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Authentication failed

TABLE 308 Authentication failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Pseudonym authentication succeeded

NOTE
This event is not applicable for vSZ-H.
TABLE 309 Pseudonym authentication succeeded event
Event
Event Type
Event Code
Severity
Attribute
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Authentication succeeded
authSuccess
1604
Debug
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"=" radiusd" "realm"="wlan.3gppnetwork.org"
"SCGMgmtIp"="2.2.2.2" "ueMacAddr"="aa:bb:cc:gg:hh:ii" "ueImsi"="12345"
"ueMsisdn"="98787" "authType"="EAP-SIM/AKA"
Authentication successful for UE with IMSI [{ueImsi}] and MSISDN [{ueMsisdn}].
{produce.short.name} used is [{SCGMgmtIp}]
This event occurs when the RADIUS accept is sent back to the AP. This event
applies only for TTG/PDG session.
Note: The attribute Permanent ID is used for authentication.
Authentication failed
authFailed
1605
Debug
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"=" radiusd" "realm"="wlan.3gppnetwork.org"
"SCGMgmtIp"="2.2.2.2" "ueMacAddr"="aa:bb:cc:gg:hh:ii"
"ueImsi"="12345","ueMsisdn"="98787", "cause"="<Cause of failure>"
"authType"="EAP-SIM/AKA"
Authentication failed for UE with IMSI [{ueImsi}] and MSISDN [{ueMsisdn}]. Cause
= [{cause}]. {produce.short.name} used is [{SCGMgmtIp}]
This event occurs when the RADIUS reject is sent back and the MS-ISDN is
provided (if available).
Note: The attribute Permanent ID is used for authentication.
Pseudonym authentication succeeded
pseudonymAuthSuccess
1606
Debug
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"=" radiusd" "realm"="wlan.3gppnetwork.org"
Events Types
Authentication Events
191

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Smartzone 300Smartcell gateway 200

Table of Contents

Save PDF