Unsync Ntp Time; Cluster Upload Ksp File Started; Cluster Upload Ksp File Completed - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types
Cluster Events
TABLE 426 Cluster name is changed event (continued)
Event

Unsync NTP Time

TABLE 427 Unsync NTP Time event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Cluster upload KSP file started

TABLE 428 Cluster upload KSP file started event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Cluster upload KSP file completed

TABLE 429 Cluster upload KSP file completed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
234
Cluster name is changed
Event Management) of the event, SNMP trap and email will be generated on
successful cluster-name modification.
Cluster name change will fail if any node in either a two, three or four node cluster
is out of service. For example, if in a three node cluster, any one node is powered
off or the Ethernet cable is unplugged, cluster name change will fail.
Unsync NTP Time
unsyncNTPTime
855
Major
"reason"="xxx", "clusterName"="xxx, "status"="xxx"
Node [{nodeName}] time is not synchronized because of [{reason}]. The time
difference is [{status}] seconds.
This event occurs when the cluster time is not synchronized.
Cluster upload KSP file started
clusterUploadKspFileStart
856
Informational
"clusterName"="xxx",
Cluster [{ clusterName}] upload KSP file completed.
This event occurs when the cluster starts the upload process of the
Cluster upload KSP file completed
clusterUploadKspFileSuccess
857
Informational
"clusterName"="xxx"
Starting upload KSP file in cluster [{clusterName}]
This event occurs when the cluster uploads the
ksp file.
ksp file successfully.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A