Diameter Peer Remove Successful; Diameter Realm Entry Error - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Diameter peer remove successful

NOTE
This alarm is not applicable for vSZ-H.
TABLE 152 Diameter peer remove successful alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions

Diameter realm entry error

NOTE
This alarm is not applicable for vSZ-H.
TABLE 153 Diameter realm entry error alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Diameter peer remove successful
diaPeerRemoveSuccess
1409
Major
A single event triggers a single alarm.
"ctrlBladeMac"="aa:bb:cc:dd:ee:ff" "mvnoId"=12 "srcProcess"="<Application
Name>" "realm"="ruckus.com" "originHost" = "Node1" "SCGMgmtIp"="2.2.2.2"
"peerIp" = "3.3.3.3" "peerName" = "OCS1" "peerRealmName" =
"organization.com""desc" = "Peer removal success"
[{srcProcess}] Peer [{peerName}] Realm [{peerRealmName}] removal is successful
on {produce.short.name} [{SCGMgmtIp}]
This alarm is triggered when the peer is removed successfully from the table. The
remote peer sends a diameter disconnect peer request (DPR) with the cause of
not wanting to talk.
Ensure that the peer removal is intentional. It is also removed when the peer
sends a cause message.
Diameter realm entry error
diaRealmEntryErr
1410
Major
A single event triggers a single alarm.
"ctrlBladeMac"="aa:bb:cc:dd:ee:ff" "mvnoId"=12 "srcProcess"="<Application
Name>" "realm"="ruckus.com" "originHost" = "Node1" "SCGMgmtIp"="2.2.2.2"
"peerRealmName" = "organization.com" "peerName" = "OCS1" "desc" = "Failed
to add route for Realm"
[{srcProcess}] Failed to add route for Realm [{peerRealmName}] on
{produce.short.name} [{SCGMgmtIp}]
This alarm is triggered due to realm route entry add error. This may arise when the
realm entry exists and another realm entry is added. Creating two diameter
services with same realm name causes this problem.
Ensure that peer supports the application for the given realm and is up and
running.
Alarm Types
System Alarms
131