Zone Configuration Preparation Failed; Ap Configuration Generation Failed; End-Of-Life Ap Model Detected - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types
Configuration Events

Zone configuration preparation failed

TABLE 452 Zone configuration preparation failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

AP configuration generation failed

TABLE 453 AP configuration generation failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

End-of-life AP model detected

TABLE 454 End-of-life AP model detected event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
NOTE
Refer to Configuration Alarms
242
Zone configuration preparation failed
zoneCfgPrepareFailed
1021
Major
"nodeMac"="50:A7:33:24:E7:90","zoneName"="openZone"
Failed to prepare zone [{zoneName}] configuration required by ap configuration
generation
This event occurs when the controller is unable to prepare a zone configuration
required by the AP.
AP configuration generation failed
apCfgGenFailed
1022
Major
"nodeMac"="50:A7:33:24:E7:90","zoneName"="openZone",
"apCfgGenFailedCount"="25"
Failed to generate configuration for [{apCfgGenFailedCount}] AP(s) under
zone[{zoneName}].
This event occurs when the controller fails to generate the AP configuration under
a particular zone.
End-of-life AP model detected
cfgGenSkippedDueToEolAp
1023
Major
"nodeMac"="50:A7:33:24:E7:90","zoneName"="openZone","model"="R300,T30
0"
Detected usage of end-of-life ap model(s)[{model}] while generating configuration
for AP(s) under zone[{zoneName}].
This event occurs when the controller detects the AP model's end-of-life under a
certain zone.
on page 87.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A