3Rd Party Client Session Logout; Client Roaming Disconnected; Client Blocked - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm and event, supporting smartzone 3.6
Hide thumbs Also See for Virtual SmartZone High Scale:
Table of Contents

Advertisement

3rd party client session logout

NOTE
This event is not applicable for vSZ-H.
TABLE 356 3rd party client session logout event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Client roaming disconnected

TABLE 357 Client roaming disconnected event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Client blocked

TABLE 358 Client blocked event
Event
Event Type
Event Code
Severity
Attribute
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
3rd party client session logout
3rdPtyClientSessionLogout
217
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"clientIP"="x.x.x.x", "zoneUUID"="xxxxxx", "userId"="uuid"
3rd party client [{clientIP||clientMac}] of Zone [{zoneName}] on DP [{dpName||
dpKey}] occurred session logout.
This event occurs when 3rd party client on AP zone data plane occurs. This
results in a session logs out.
Client roaming disconnected
smartRoamDisconnect
218
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx", "ssid"="xxxxx",
"assoicationTime"="600", "wlanId"="xxxxx", "userName"="xxxxx",
"clientIP"="x.x.x.x","apName"="", "apLocation"="", "username"="","osType"="",
"radio"="", "vlanId"="","sessionDuration"="","txBytes"="", "rxBytes"="", "rssi"="",
"receivedSignalStrength"="", "apGps"="", "hostname"="", "encryption"="",
"disconnectReason"="", "bssid"="", "ni_rx_rssilo_cnt"="" , "ni_rx_tot_cnt"="" ,
"ns_rx_rssilo_cnt"="" , "ns_rx_tot_cnt"="" , "ni_tx_xput_lo_cnt"="" ,
"ni_tx_xput_lo_dur"="" , "Instantaneous rssi"="" , "Xput"="","userId"=""uuid"
Client [{userName||IP||clientMac}] disconnected from WLAN [{ssid}] on AP
[{apName&&apMac}] due to SmartRoam policy.
This event occurs when the client disconnects from the WLALN due to a smart
roam policy.
Client blocked
clientBlockByDeviceType
219
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"deviceType"="xxxxx", "ssid"="xxxxx", "wlanId"="xxxxx",
Events Types
Client Events
211

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Smartzone 300Smartcell gateway 200

Table of Contents

Save PDF