TABLE 662 All data planes in the zone affinity profile are disconnected event (continued)
Event
Event Code
Severity
Attribute
Displayed on the web
interface
Description
CALEA UE Matched
TABLE 663 CALEA UE Matched event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
NOTE
Refer to
Data Plane Alarms
Diameter initialization error
NOTE
This event is not applicable for vSZ-H.
TABLE 664 Diameter initialization error event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
All data planes in the zone affinity profile are disconnected
1267
Major
"dpName="xxxxxxxx", "dpKey"="xx:xx:xx:xx:xx:xx",
"zoneAffinityProfileId"="xxxxxxxx"
The Last one Data Plane [{dpName&&dpKey}] is disconnected Zone Affinity profile
[{zoneAffinityProfileId}].
This event occurs when all the data planes disconnect from the zone affinity
profile.
CALEA UE Matched
dpCaleaUeInterimMatched
1268
Informational
"clientMac"="xx:xx:xx:xx:xx:xx", "ssid"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx",
"apIpAddress"="xx.xx.xx.xx", "dpKey"="xx:xx:xx:xx:xx:xx", "dpIP"="xx.xx.xx.xx",
"txBytes"="xxxxx", "rxBytes"="xxxxx"
CALEA matches client [{clientMac}] on WLAN [{ssid||authType}]from AP
[{apName&&apMac}]. TxBytes[{txBytes}], RxBytes[{rxBytes}].
This event occurs when the data plane CALEA user equipment and client
matches.
on page 90.
Diameter initialization error
diaInitilizeErr
1401
Critical
"ctrlBladeMac"="aa:bb:cc:dd:ee:ff","srcProcess"="<Application Name>"
"realm"="ruckus.com","originHost" = "Node1","SCGMgmtIp"="2.2.2.2","desc" =
"Diameter Stack Initialization Failure on {produce.short.name}"
[{srcProcess}] Diameter Stack Initialization Failure on {produce.short.name}
[{SCGMgmtIp}]
This event occurs due to stack initialization failure.
Events Types
System Events
317
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?