Ap Wlan Oversubscribed; Ap Join Zone Failed - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

TABLE 21 AP firmware update failed alarm (continued)
Alarm
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions

AP WLAN oversubscribed

TABLE 22 AP WLAN oversubscribed alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions

AP join zone failed

NOTE
This alarm is not applicable for vSZ-H.
TABLE 23 AP join zone failed alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
AP firmware update failed
107
Major
From the event code 107 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm is auto cleared with the event code 106.
"apMac"="xx:xx:xx:xx:xx:xx", "wsgIP"="xxx.xxx.xxx.xxx"
AP [{apName&&apMac}] failed to update its firmware from [{fromVersion}] to
[{toVersion}] [{reason}]
This alarm is triggered when the AP fails to update the firmware details.
Retrieve the AP support text. Reboot the AP and trigger another configuration
change for upgrading the AP. If it fails revert to the previous zone firmware.
AP WLAN oversubscribed
apWlanOversubscribed
1081
Major
From the event code 114 an alarm is raised for every event. A single event
triggers a single alarm.
"apMac"="xx:xx:xx:xx:xx:xx"
AP [{apName&&apMac}] does not have enough capacity to deploy all wlans. Only
maximum wlan number of the AP can be deployed
This alarm is triggered when the AP exceeds the maximum capacity for deploying
all WLANs.
Any of the following are the recommended actions.
• Create a new WLAN group with WLANs. Ensure that it is not more than
the AP's WLAN capacity. Apply the new WLAN group to either the AP
or the AP's AP Group.
• Find the WLAN group used by the AP and reduce the number of
WLAN.
AP join zone failed
apJoinZoneFailed
115
Major
From the event code 115 an alarm is raised for every event. A single event
triggers a single alarm.
Alarm Types
AP Communication Alarms
67