Events Types
Client Events
TABLE 364 Force DHCP disconnected event (continued)
Event
Description
WDS device joined
TABLE 365 WDS device joined event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
WDS device left
TABLE 366 WDS device left event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Client is blocked because of barring UE rule
TABLE 367 Client is blocked because of barring UE rule event
Event
Event Type
Event Code
Severity
Attr ibute
Displayed on the web
interface
Description
214
Force DHCP disconnected
This event occurs when the client disconnects by force from the dynamic host
configuration protocol.
WDS device joined
wdsDeviceJoin
226
Informational
"apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"wdsDevicetMac"="xx:xx:xx:xx:xx:xx"
Device [{wdsDeviceMac}] sends traffic via Client [{clientMac}] in AP
[{apName&&apMac}].
This event occurs when a subscriber device joins the network provided by a
Customer-Premises Equipment (CPE) of a client associated AP through a wireless
distribution system (WDS) mode.
WDS device left
wdsDeviceLeave
227
Informational
"apName"="xxxxx", "apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx",
"wdsDevicetMac"="xx:xx:xx:xx:xx:xx"
Device [{wdsDeviceMac}] stops traffic via Client [{clientMac}] in AP
[{apName&&apMac}].
This event occurs when a subscriber device leaves the network provided by a
CPE client associated to an AP through WDS.
Client is blocked because of barring UE rule
clientBlockByBarringUERule
228
Informational
"apMac"="xx:xx:xx:xx:xx:xx", "clientMac"="xx:xx:xx:xx:xx:xx"
Client [clientMac}] of WLAN [{ssid}] from AP [{apName&&apMac}] was blocked
because of barring UE rule.
This event occurs when a client is temporally blocked by the UE barring rule.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?