The Number Of Devices Exceeded Its Limit; Tunnel Events - Access Point (Ap) - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

TABLE 698 The number of users exceed its limit event (continued)
Event
Severity
Attribute
Displayed on the web
interface
Description

The number of devices exceeded its limit

TABLE 699 The number of devices exceeded its limit event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
NOTE
Refer to Threshold Alarms

Tunnel Events - Access Point (AP)

Following are the events related to tunnel events on access point.
• Data plane accepted a tunnel request
• Data plane rejected a tunnel request
• Data plane terminated a tunnel
• AP created a tunnel
• AP tunnel disconnected
• AP softGRE tunnel fails over primary to secondary
• AP softGRE tunnel fails over secondary to primary
• AP softGRE gateway reachable
• AP softGRE gateway not reachable
• Data plane set up a tunnel
• AP secure gateway association success
• AP is disconnected from secure gateway
• AP secure gateway association failure
NOTE
Event codes 601 to 610 are not applicable for vSZ-H.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
The number of users exceed its limit
Major
No attributes for this event.
The number of users exceeded its limit.
This event occurs when the number of users exceeds the specified limit. The
threshold limit for SCG-200 and vSZ-H is 950000.
The number of devices exceeded its limit
tooManyDevices
7002
Major
No attributes for this event.
The number of devices exceeded its limit
This event occurs when the number of devices exceeds the specified limit. The
threshold limit for SCG-200 and vSZ-H is 2850000.
on page 135.
on page 332
on page 332
on page 332
on page 332
on page 333
on page 334
on page 334
on page 334
on page 335
on page 335
on page 335
on page 333
on page 333
Events Types

Tunnel Events - Access Point (AP)

331