Cluster Upgrade Failed; Cluster Application Stopped; Cluster Application Started - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Events Types
Cluster Events

Cluster upgrade failed

TABLE 394 Cluster upgrade failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Auto Clearance

Cluster application stopped

TABLE 395 Cluster application stopped event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
Auto Clearance

Cluster application started

TABLE 396 Cluster application started event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
224
Cluster upgrade failed
upgradeClusterFailed
815
Major
"clusterName"="xxx", "nodeName"="xxx",
"nodeMac"=" xx:xx:xx:xx:xx:xx", "fromVersion"="x.x", "toVersion"="x.x"
Cluster [{clusterName}] could not be upgraded from [{fromVersion}] to
[{toVersion}].
This event occurs when the version upgrade of a cluster fails.
This event triggers the alarm 807, which is auto cleared by the event code 814.
Cluster application stopped
clusterAppStop
816
Critical
"appName"="xxxx", "nodeName"="xxx",
"nodeMac"=" xx:xx:xx:xx:xx:xx",
Application [{appName}] on node [{nodeName}] stopped
This event occurs when an application on node is stopped.
This event triggers the alarm 808, which is auto cleared by the event code 817.
Cluster application started
clusterAppStart
817
Informational
"appName"="xxxx", "nodeName"="xxx",
"nodeMac"=" xx:xx:xx:xx:xx:xx",
Application [{appName}] on node [{nodeName}] started
This event occurs when an application on node starts.
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A