Tunnel Alarms - Access Point; Ap Softgre Gateway Not Reachable; Ap Is Disconnected From Secure Gateway - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

TABLE 168 The number of devices exceeded its limit alarm (continued)
Alarm
Recommended Actions
NOTE
Refer to Threshold Events

Tunnel Alarms - Access Point

Following are the alarms related to tunnel.
•

AP softGRE gateway not reachable

•

AP is disconnected from secure gateway

• AP secure gateway association failure
AP softGRE gateway not reachable
TABLE 169 AP softGRE gateway not reachable alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions
AP is disconnected from secure gateway
TABLE 170 AP is disconnected from secure gateway alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Attribute
Displayed on the web
interface
Description
Recommended Actions
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
The number of devices exceeded its limit
No action is required.
on page 326.
on page 139
on page 139
on page 140
AP softGRE gateway not reachable
apSoftGREGatewayNotReachable
614
Critical
From the event code 614 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm code is auto cleared with the event code 613.
"apMac"="xx:xx:xx:xx:xx:xx", "softGREGatewayList"="xxx.xxx.xxx.xxx"
AP [{apName&&apMac}] is unable to reach the following gateways:
[{softGREGatewayList}]
The AP fails to connect to the soft-GRE gateway.
Check the primary and secondary soft-GRE gateway.
AP is disconnected from secure gateway
ipsecTunnelDisassociated
661
Major
From the event code 661 an alarm is raised for every event. A single event
triggers a single alarm.
apMac="xx:xx:xx:xx:xx:xx","ipsecGWAddress"="x.x.x.x"
AP [{apName&&apMac}] is disconnected from secure gateway
[{ipsecGWAddress}].
This alarm is triggered when the AP is disconnected from secure gateway.
No action required.
Alarm Types

Tunnel Alarms - Access Point

139