TABLE 126 Connect to SCI failure alarm (continued)
Alarm
Aggregation Policy
Auto Clearance
Displayed on the web
interface
Description
Recommended Actions
SCI has been disabled
TABLE 127 SCI has been disabled alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Displayed on the web
interface
Description
Recommended Actions
SCI and FTP have been disabled
TABLE 128 SCI and FTP have been disabled alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Displayed on the web
interface
Description
Recommended Actions
NOTE
Refer to
Events Types
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Connect to SCI failure
From the event code xxx an alarm is raised for every event. A single event triggers
a single alarm.
The alarm is auto cleared with the event code xxx.
Try to connect to SCI with all SCI profiles but failure.
This alarm occurs when the controller tries connecting to SCI with its profiles but
fails.
SCI has been disabled
disabledSciDueToUpgrade
4004
Warning
From the event code xxx an alarm is raised for every event. A single event triggers
a single alarm.
The alarm is auto cleared with the event code xxx.
SCI has been disabled due to SZ upgrade, please reconfigure SCI if needed.
This alarm occurs when SCI is disabled due to the controller upgrade. This could
require reconfiguration of SCI.
The controller does not support SCI prior to version 2.3. You would need to
upgrade SCI to 2.3 or above and reconfigure the required information of SCI on
the controller dashboard.
SCI and FTP have been disabled
disabledSciAndFtpDueToMutuallyExclusive
4005
Warning
From the event code xxx an alarm is raised for every event. A single event triggers
a single alarm.
The alarm is auto cleared with the event code xxx.
SCI and FTP have been disabled. It is recommended to enable SCI instead of
FTP
This event occurs when the SCI and FTP are disabled.
on page 141.
Alarm Types
SCI Alarms
119
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?
Questions and answers