Events Types
DHCP Events
TABLE 493 Data plane DHCP IP pool usage rate is 80 percent event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
DHCP Events
NOTE
This event is not applicable for vSZ-H.
Following are the events related to DHCP (Dynamic Host Configuration Protocol).
•
DHCP inform received
•
DHCP dcln received
DHCP inform received
TABLE 494 DHCP inform received event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
DHCP dcln received
TABLE 495 DHCP dcln received event
Event
Event Type
Event Code
Severity
Attribute
256
Data plane DHCP IP pool usage rate is 80 percent
dpDhcpIpPoolUsageRate80
1266
Warning
"dpName="xxxxxxxx", "dpKey"="xx:xx:xx:xx:xx:xx"
Data Plane[{dpName&&dpKey}] DHCP IP Pool usage rate is 80 percent
This event occurs when the data plane DHCP pool usage rate is 80%.
on page 256
on page 256
DHCP inform received
dhcpInfmRcvd
1238
Informational
"mvnoId"=NA "wlanId"=NA,"zoneId"="NA" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"="dhcp","realm"="NA" "ueMacAddr"="bb:aa:dd:dd:ee:ff"
"SCGMgmtIp"="2.2.2.2"
DHCP Inform was received by {produce.short.name} [{SCGMgmtIp}] from UE
[{ueMacAddr}]
This event occurs when the controller receives the DHCP information.
DHCP dcln received
dhcpDclnRcvd
1239
Major
"mvnoId"=12 "wlanId"=1,"zoneId"="10" "ctrlBladeMac"="aa:bb:cc:dd:ee:ff"
"srcProcess"="aut","realm"="NA" "ueMacAddr"="bb:aa:dd:dd:ee:ff"
"SCGMgmtIp"="2.2.2.2"
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A
Need help?
Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?
Questions and answers