Session Alarms; Binding Failed; Sta Interface Alarms - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm Types

Session Alarms

Session Alarms

NOTE
This section is not applicable for vSZ-H.
Following is the alarm related to session.
•

Binding failed

on page 120
Binding failed
TABLE 129 Binding failed alarm
Alarm
Alarm Type
Alarm Code
Severity
Aggregation Policy
Auto Clearance
Attribute
Displayed on the web
interface
Description
Recommended Actions
NOTE
Refer to Session Events

STA Interface Alarms

NOTE
This section is not applicable for vSZ-H.
Following are the alarms related to STA interface.
• STA authentication failed transport down
• STA authentication failed failure response
• STA authentication failed decode failure
• STA re-authorization failed
• STA response timer expired
• Retransmission exhausted
120
Binding failed
bindingFailure
5010
Major
From the event code 5010 an alarm is raised for every event. A single event
triggers a single alarm.
The alarm is auto cleared with the event code 5009.
"ctrlBladeMac"="aa:bb:cc:dd:ee:ff", "SCGMgmtIp"="2.2.2.2",
"lmaIp"="1.1.1.1", "ueMacAddr"="aa:bb:cc:gg:hh:ii",
"dataBladeIp"="3.3.3.3", "ueIpAddr"="5.5.5.5"
Binding for [{ueMacAddr}] UE binding update failure on {produce.short.name}-D
[{dataBladeIp}]. Failure Cause [{cause}].
This alarm is logged when the mobile node binding fails.
No action is required.
on page 296.
on page 121
on page 121
on page 121
on page 122
on page 122
on page 123
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Part Number: 800-71565-001 Rev A