Data Plane Discovered; Data Plane Discovery Failed - Ruckus Wireless Virtual SmartZone High Scale Reference Manual

Alarm and event, supporting smartzone 3.6
Hide thumbs Also See for Virtual SmartZone High Scale:
Table of Contents

Advertisement

Events Types
Data Plane Events
Event
Data plane IP address updated
Data plane statistics update failed
Data plane physical interface down
Data plane packet pool is under critical low water
mark
on page 248
Data plane process restarted
Data plane deleted
on page 250
Data plane upgrading
on page 251
Data plane of data center side successfully
connects to the CALEA server
Data plane successfully connects to the other
data plane
on page 253
Start CALEA mirroring client in data plane
page 254
Data plane DHCP IP pool usage rate is 80
percent
on page 255

Data plane discovered

TABLE 457 Data plane discovered event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description

Data plane discovery failed

TABLE 458 Data plane discovery failed event
Event
Event Type
Event Code
Severity
Attribute
Displayed on the web
interface
Description
244
Event
on page 246
Data plane updated to a new control plane
page 246
on page 247
Data plane connected
on page 247
Data plane physical interface up
Data plane packet pool is above high water mark
on page 249
on page 249
Data plane discovery succeeded
Data plane license is not enough
Data plane upgrade succeeded
Data plane of data center side fails to connect to
on page 252
the CALEA server
Data plane fails to connect to the other data
plane
on page 254
on
Stop CALEA mirroring client in data plane
page 255
Data plane discovered
dpDiscoverySuccess (server side detect)
501
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "wsgIP"="xxx.xxx.xxx.xxx"
Data plane [{dpName||dpKey}] sent a connection request to
{produce.short.name} [{cpName||wsgIP}].
This event occurs when the data plane successfully connects to the controller.
Data plane discovery failed
dpDiscoveryFail (detected on the server side)
502
Informational
"dpKey"="xx:xx:xx:xx:xx:xx", "wsgIP"="xxx.xxx.xxx.xxx"
Data plane [{dpName||dpKey}] failed to send a discovery request to
{produce.short.name} [{cpName||wsgIP}].
This event occurs when the data plane fails to connect to the controller.
on
on page 247
on page 248
on page 250
on page 251
on page 251
on page 252
on
Ruckus SmartCell Gateway 200 Virtual SmartZone High Scale and SmartZone 300 Alarm and Event Reference Guide
Event
Data plane status update failed
Data plane disconnected
on page 247
Data plane packet pool is under low water mark
on page 248
Data plane core dead
on page 249
Data plane managed
on page 250
Data plane upgrade started
on page 251
Data plane upgrade failed
on page 252
Data Plane of data center side disconnects to
CALEA server
on page 253
Data plane disconnects to the other data plane
on page 254
Data plane DHCP IP pool usage rate is 100
percent
on page 255
Part Number: 800-71565-001 Rev A
on page 246

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Virtual SmartZone High Scale and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Smartzone 300Smartcell gateway 200

Table of Contents

Save PDF