Toshiba e-STUDIO 5540C Service Manual page 1442

e-STUDIO5540C/6540C/6550C
05/08 Mode Element Sub Element
05 Adjustment Image ADF scan
mode Processing noise reduction
05 Adjustment Image ADF scan
mode Processing noise reduction
05 Adjustment System Maintenance
mode
05 Adjustment System Feeding
mode system/Paper
transport
05 Adjustment System Image
mode
05 Adjustment System Image
mode
05 Adjustment FAX FAX
mode
05 Adjustment System Maintenance
mode
05 Adjustment Mode
Item Subitem Code
SCN(color) 8415
SCN(color) 8416
9043
Media sensor 9092
position
adjustment
9104
9107
9850
9960
Sub- Default
Details
Code value
Printed image 100
Photo (developing paper) 100
Equipment number (serial
number) display
Media sensor position
adjustment
Compression quality of 5
SLIM PDF background
processing
Resolution of SLIM PDF 1
background processing
4
Display of equipment Refer to
information (SRAM) contents
140
Acceptable
RAM Contents
value
0~200 SYS When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When
the value increases, the effect of reducing streaks
(set with 08-8300) becomes smaller.
When the value is too small, text might be blurry.
When "0" is set, this function is disabled.
0~200 SYS When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When
the value increases, the effect of reducing streaks
(set with 08-8300) becomes smaller.
When the value is too small, text might be blurry.
When "0" is set, this function is disabled.
SYS If this code is performed, 08-9601 is performed. 7
digits out of 9 digits can be entered except for
upper 2 digits (fixed digits).
- Checks the reference voltage of the media sensor
while no paper is inserted between the tray and
copy paper and adjusts the position of the sensor
accordingly.
0~10 SYS 0-10
0: High compression, low image quality
10: Low compression, high image quality
0~3 SYS 0: 75dpi
1: 100dpi
2: 150dpi
3: 200dpi
0~7 SYS When the value is entered for this code the ring
tone comes from the speaker at the set volume.
The set value is stored when the [INTERRUPT]
button is pressed.
0~2 SYS Displays the equipment information in SRAM.
0: Not set
1: Destinations other than NAD/NAC
2: NAD/NAC
<Default value>
NAD/NAC: 2
Others: 1
Proc
ServiceUI
edure
1
1
1
6 Yes
1
1
12
2
Ver11