Toshiba e-STUDIO 5540C Service Manual page 1432

e-STUDIO5540C/6540C/6550C
05/08 Mode Element Sub Element
05 Adjustment Image Pure
mode Processing Black/Gray
threshold
adjustment
05 Adjustment Image Pure
mode Processing Black/Gray
threshold
adjustment
05 Adjustment Image Pure
mode Processing Black/Gray
threshold
adjustment
05 Adjustment Image Pure
mode Processing Black/Gray
threshold
adjustment
05 Adjustment Image Black selection
mode Processing
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Mode
Item Subitem Code
PRT(color) PCL/Image 8212
PRT(color) Twin color 8213
print/General
PRT(color) Twin color 8214
print/General
PRT(color) Twin color 8215
print/General
PRT(color) Twin color print 8218
PS/PDF 600dpi 8239
automatic stroke
adjustment
PS/PDF 600dpi 8239
automatic stroke
adjustment
Sub- Default
Details
Code value
3 Line art 8
Text 8
Graphics 1
Image 1
Image 0
0 Default setting 0
1 Minimum stroke width when 2
disabled
130
Acceptable
RAM Contents
value
1~255 SYS The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes.
1~255 SYS The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes.
1~255 SYS The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes.
1~255 SYS The larger the value, the wider the range of colors
to be replaced with black becomes.
The smaller the value, the narrower the range
becomes.
0~1 SYS Sets whether the image on an original is printed in
the color or the black mode.
0: OFF (printed in color)
1: ON (printed in black)
0~3 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
1~2 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to "2", the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots
Proc
ServiceUI
edure
4 Yes
1 Yes
1 Yes
1 Yes
1 Yes
4
4
Ver11