Introduction; Symbols - Danfoss ADAP-KOOL Drive Programming Manual

®
ADAP-KOOL Drive Programming Guide

1 Introduction

1.1.1 Software Version and Approvals: ADAP-KOOL
This Operating Instructions can be used for all ADAP-KOOL
The software version number can be seen from parameter 15-43.

1.1.2 Symbols

Symbols used in this guide.
NB!
Indicates something to be noted by the reader.
Indicates a general warning.
Indicates a high-voltage warning.
*
Indicates default setting
® Drive
®
ADAP-KOOL Drive
Operating Instructions
Software version: 2.xx
® Drive frequency converters with software version 2.xx.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
1 Introduction
1
3