Danfoss ADAP-KOOL Drive Programming Manual page 115

®
ADAP-KOOL Drive Programming Guide
[25] Comparator 3
[26] Logic rule 0
[27] Logic rule 1
[28] Logic rule 2
[29] Logic rule 3
[30] SL Time-out 0
[31] SL Time-out 1
[32] SL Time-out 2
[33] Digital input DI18
[34] Digital input DI19
[35] Digital input DI27
[36] Digital input DI29
[37] Digital input DI32
[38] Digital input DI33
[39] Start command
[40] Drive stopped
[41] Reset Trip
[42] Auto Reset Trip
[43] OK Key
[44] Reset Key
[45] Left Key
[46] Right Key
[47] Up Key
[48] Down Key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL Time-out 3
[71] SL Time-out 4
[72] SL Time-out 5
[73] SL Time-out 6
[74] SL Time-out 7
[80] No Flow
[81] Dry Pump
[82] End of Curve
[83] Broken Belt
13-52 SL Controller Action
Array [20]
Option:
[0] * Disabled
[1] No action
[2] Select set-up 1
Function:
Select the action corresponding to the SLC event. Actions are executed when the corresponding
event (defined in par.13-51 SL Controller Event
available for selection:
Changes the active set-up (par.0-10
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
) is evaluated as true. The following actions are
Active Set-up ) to '1'.
3
115