Danfoss ADAP-KOOL Drive Programming Manual page 199

®
ADAP-KOOL Drive Programming Guide
23-83 Energy Savings
Range:
0 kWh* [0 - 0 kWh]
23-84 Cost Savings
Range:
0 N/A* [0 - 2147483647 N/A]
Function:
This parameter allows a readout of the accumulated difference between the reference power and
the actual output power.
Motor Power [HP]
If motor size set in Hp (par.1-21
Energy Savings.
Function:
This parameter allows a readout of the calculation based on the above equation (in local currency).
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
), the equivalent kW value will be used for the
3
199