Danfoss ADAP-KOOL Drive Programming Manual page 45

®
ADAP-KOOL Drive Programming Guide
0-82 Additional Working Days
Array with 5 elements [0] - [4] displayed below parameter number in display. Press OK and step between elements by means of
the LCP.
Range:
0 N/A* [0 - 0 N/A]
0-83 Additional Non-Working Days
Array with 15 elements [0] - [14] displayed below parameter number in display. Press OK and step between elements by means of
on the LCP.
Range:
0 N/A* [0 - 0 N/A]
0-89 Date and Time Readout
Range:
0 N/A* [0 - 0 N/A]
Function:
Defines dates for additional working days that normally would be non-working days according to
par.0-82 Additional Working Days .
Function:
Defines dates for additional working days that normally would be non-working days according to
Working Days
par.0-81 .
Function:
Displays the current date and time. The date and time is updated continuously.
The clock will not begin counting until a setting different from default has been made in par.
Set Date and Time
0-70 .
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
▲ ▼
and buttons on
3
▲ ▼
and buttons
45