Danfoss ADAP-KOOL Drive Programming Manual page 193

®
ADAP-KOOL Drive Programming Guide
23-51 Period Start
Range:
0 N/A* [0 - 0 N/A]
NB!
When mounting an Analog I/O MCB109 option card, a battery back up of the date and time is included.
23-53 Energy Log
Range:
0 N/A* [0 - 4294967295 N/A]
NB!
All counters are automatically reset when changing the setting in par.23-50
counters will stop at maximum value.
NB!
When mounting an Analog I/O MCB109 option card, a battery back up of the date and time is included.
Function:
Set the date and time at which the Energy Log starts update of the counters. First data will be stored
in counter [00] and start at the time/date programmed in this parameter.
Date format will depend on setting in par.0-71
Time Format
0-72 .
Function:
Array with a number of elements equal to the number of counters ([00]-[xx] below parameter
number in display). Press OK and Step between elements by means of
Local Control Panel.
Array elements:
Data from latest period is stored in the counter with the highest index.
At power down all counter values are stored and resumed at next power up.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Date Format and time format on setting in par.
▲
and
Energy Log Resolution
. At overflow the update of the
3
▼
buttons on the
193