Danfoss ADAP-KOOL Drive Programming Manual page 108

3 Parameter Description
13-11 Comparator Operator
Array [6]
Option:
[0] * <
3
≈ (equal)
[1]
[2] >
13-12 Comparator Value
Array [6]
Range:
0 N/A* [-100000.000 - 100000.000 N/A]
3.10.4 13-2* Timers
This parameter group consists of timer parameters.
Use the result (TRUE or FALSE) from
13-40 Logic Rule Boolean 1
Start timer 1 [29]) until the timer value entered in this parameter is elapsed. Then it becomes TRUE again.
All parameters in this parameter group are array parameters with index 0 to 2. Select index 0 to program Timer 0, select index 1 to program Timer 1,
and so on.
13-20 SL Controller Timer
Array [8]
Range:
0 N/A* [0 - 0 N/A]
3.10.5 13-4* Logic Rules
Combine up to three boolean inputs (TRUE / FALSE inputs) from timers, comparators, digital inputs, status bits and events using the logical operators
AND, OR, and NOT. Select boolean inputs for the calculation in par.13-40
Boolean 3 . Define the operators used to logically combine the selected inputs in par.13-41
Priority of calculation
The results of par.13-40 Logic Rule Boolean 1
(TRUE / FALSE) of this calculation is combined with the settings of par.13-43
result (TRUE / FALSE) of the logic rule.
13-40 Logic Rule Boolean 1
Array [6]
Option:
[0] * False
[1] True
[2] Running
108
Function:
Select < [0] for the result of the evaluation to be TRUE, when the variable selected in par.
13-10 Comparator Operand
will be FALSE, if the variable selected in par.13-10
value in par.13-12
Select ≈ [1] for the result of the evaluation to be TRUE, when the variable selected in par.
Comparator Operand
13-10
ue .
Select > [2] for the inverse logic of option < [0].
Function:
Enter the 'trigger level' for the variable that is monitored by this comparator. This is an array pa-
rameter containing comparator values 0 to 5.
timers
directly to define an
, par.13-42 Logic Rule Boolean 2 or par.13-44
Function:
Enter the value to define the duration of the FALSE output from the programmed timer. A timer is
only FALSE if it is started by an action (i.e.
elapsed.
, par.13-41 Logic Rule Operator 1
Function:
Enters the fixed value of FALSE in the logic rule.
Enters the fixed value TRUE in the logic rule.
See parameter group 5-3* for further description.
MG.11.N1.02 - VLT
is smaller than the fixed value in par.13-12
Comparator Value
.
is approximately equal to the fixed value in par.13-12
event SL Controller Event
(see par.13-51
Logic Rule Boolean 3 ). A timer is only FALSE when started by an action (i.e.
Start timer 1
Logic Rule Boolean 1 , par.13-42
Logic Rule Operator 1
and par.13-42 Logic Rule Boolean 2
Logic Rule Operator 2 and par.13-44
® is a registered Danfoss trademark
®
ADAP-KOOL Drive Programming Guide
Comparator Value
Comparator Operand is greater than the fixed
Comparator Val-
logic rule
), or as boolean input in a
[29]) and until the given timer value has
Logic Rule Boolean 2 and par.13-44
and par.13-43 Logic Rule Operator 2
are calculated first. The outcome
Logic Rule Boolean 3 , yielding the final
. The result
(see par.
Logic Rule
.