Danfoss ADAP-KOOL Drive Programming Manual page 131

®
ADAP-KOOL Drive Programming Guide
3.12.6 15-4* Drive Identification
Parameters containing read only information about the hardware and software configuration of the frequency converter.
15-40 FC Type
Option:
15-41 Power Section
Option:
15-42 Voltage
Option:
15-43 Software Version
Range:
0 N/A* [0 - 0 N/A]
15-44 Ordered Typecode String
Range:
0 N/A* [0 - 0 N/A]
15-45 Actual Typecode String
Range:
0 N/A* [0 - 0 N/A]
15-46 Frequency Converter Ordering No
Range:
0 N/A* [0 - 0 N/A]
15-47 Power Card Ordering No
Range:
0 N/A* [0 - 0 N/A]
15-48 LCP Id No
Range:
0 N/A* [0 - 0 N/A]
15-49 SW ID Control Card
Range:
0 N/A* [0 - 0 N/A]
1: Alarm active
Function:
View the FC type. The read-out is identical to the ADAP-KOOL Drive Series power field of the type
code definition, characters 1-6.
Function:
View the FC type. The read-out is identical to the ADAP-KOOL Drive Series power field of the type
code definition, characters 7-10.
Function:
View the FC type. The read-out is identical to the ADAP-KOOL Drive Series power field of the type
code definition, characters 11-12.
Function:
View the combined SW version (or 'package version') consisting of power SW and control SW.
Function:
View the type code string used for re-ordering the frequency converter in its original configuration.
Function:
View the actual type code string.
Function:
View the 8-digit ordering number used for re-ordering the frequency converter in its original con-
figuration.
Function:
View the power card ordering number.
Function:
View the LCP ID number.
Function:
View the control card software version number.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
3
131