Danfoss ADAP-KOOL Drive Programming Manual page 102

3 Parameter Description
8-94 Bus Feedback 1
Range:
0 N/A* [-200 - 200 N/A]
8-95 Bus Feedback 2
3
Range:
0 N/A* [-200 - 200 N/A]
8-96 Bus Feedback 3
Range:
0 N/A* [-200 - 200 N/A]
102
Function:
Write a feedback to this parameter via the serial communication port or fieldbus option. This pa-
rameter must be selected in par.20-00
Feedback 3 Source
20-06 as a feedback source.
Function:
Bus Feedback 1
See par.8-94 for further details.
Function:
Bus Feedback 1
See par.8-94 for further details.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
®
ADAP-KOOL Drive Programming Guide
Feedback 1 Source Feedback 2 Source
, par.20-03 or par.