Danfoss ADAP-KOOL Drive Programming Manual page 59

®
ADAP-KOOL Drive Programming Guide
3-15 Reference 1 Source
Option:
[0] No function
[1] * Analog input 53
[2] Analog input 54
[7] Pulse input 29
[8] Pulse input 33
[20] Digital pot.meter
[21] Analog input X30/11
[22] Analog input X30/12
[23] Analog Input X42/1
[24] Analog Input X42/3
[25] Analog Input X42/5
[30] Ext. Closed Loop 1
[31] Ext. Closed Loop 2
[32] Ext. Closed Loop 3
Function:
Select the reference input to be used for the first reference signal. par.3-15
par.3-16 Reference 2 Source and par.3-17
signals. The sum of these reference signals defines the actual reference.
This parameter cannot be adjusted while the motor is running.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Reference 1 Source
Reference 3 Source define up to three different reference
3
,
59