Danfoss ADAP-KOOL Drive Programming Manual page 100

3 Parameter Description
8-53 Start Select
Option:
[0] Digital input
[1] Bus
3
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par.8-01
8-54 Reversing Select
Option:
[0] * Digital input
[1] Bus
[2] Logic AND
[3] Logic OR
NB!
This parameter is active only when par.8-01
8-55 Set-up Select
Option:
[0] Digital input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par.8-01
100
Function:
Select control of the frequency converter start function via the terminals (digital input) and/or via
the fieldbus.
Activates Start command via a digital input.
Activates Start command via the serial communication port or fieldbus option.
Activates Start command via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the fieldbus/serial communication port OR via one of the digital inputs.
Control Site Digital and control word
is set to [0]
Function:
Select control of the frequency converter reverse function via the terminals (digital input) and/or
via the fieldbus.
Activates Reverse command via a digital input.
Activates Reverse command via the serial communication port or fieldbus option.
Activates Reverse command via the fieldbus/serial communication port, AND additionally via one of
the digital inputs.
Activates Reverse command via the fieldbus/serial communication port OR via one of the digital
inputs.
Control Site is set to [0] Digital and control word
Function:
Select control of the frequency converter set-up selection via the terminals (digital input) and/or via
the fieldbus.
Activates the set-up selection via a digital input.
Activates the set-up selection via the serial communication port or fieldbus option.
Activates the set-up selection via the fieldbus/serial communication port, AND additionally via one
of the digital inputs.
Activate the set-up selection via the fieldbus/serial communication port OR via one of the digital
inputs.
Control Site is set to [0] Digital and control word
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
®
ADAP-KOOL Drive Programming Guide
.
.
.