Danfoss ADAP-KOOL Drive Programming Manual page 132

3 Parameter Description
15-50 SW ID Power Card
Range:
0 N/A* [0 - 0 N/A]
15-51 Frequency Converter Serial Number
Range:
0 N/A* [0 - 0 N/A]
3
15-53 Power Card Serial Number
Range:
0 N/A* [0 - 0 N/A]
3.12.7 15-6* Option Ident.
This read-only parameter group contains information about the hardware and software configuration of the options installed in slots A, B C0 and C1.
15-60 Option Mounted
Range:
0 N/A* [0 - 0 N/A]
15-61 Option SW Version
Range:
0 N/A* [0 - 0 N/A]
15-62 Option Ordering No
Range:
0 N/A* [0 - 0 N/A]
15-63 Option Serial No
Range:
0 N/A* [0 - 0 N/A]
3.12.8 15-9* Parameter Info
Parameter lists
15-92 Defined Parameters
Array [1000]
Range:
0 N/A* [0 - 9999 N/A]
15-93 Modified Parameters
Array [1000]
Range:
0 N/A* [0 - 9999 N/A]
132
Function:
View the power card software version number.
Function:
View the frequency converter serial number.
Function:
View the power card serial number.
Function:
View the installed option type.
Function:
View the installed option software version.
Function:
Shows the ordering number for the installed options.
Function:
View the installed option serial number.
Function:
View a list of all defined parameters in the frequency converter. The list ends with 0.
Function:
View a list of the parameters that have been changed from their default setting. The list ends with
0. Changes may not be visible until up to 30 seconds after implementation.
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
®
ADAP-KOOL Drive Programming Guide