Danfoss ADAP-KOOL Drive Programming Manual page 197

®
ADAP-KOOL Drive Programming Guide
23-64 Timed Period Stop
Range:
0 N/A* [0 - 0 N/A]
NB!
When mounting an Analog I/O MCB109 option card, a battery back up of the date and time is included.
23-65 Minimum Bin Value
Range:
0 %* [0 - 100. %]
23-66 Reset Continuous Bin Data
Option:
[0] * Do not reset
[1] Do reset
23-67 Reset Timed Bin Data
Option:
[0] * Do not reset
[1] Do reset
3.18.5 23-8* Payback counter
The ADAP-KOOL Drive includes a feature which can give a rough calculation on payback in cases where the frequency converter has been installed in an
existing plant to ensure energy saving by changing from fixed to variable speed control. Reference for the savings is a set value to represent the average
power yielded before the upgrade with variable speed control.
Function:
Set the date and time at which the Trend Analyses must stop update of the Timed Bin counters.
Date format will depend on setting in par.0-71
0-72 Time Format .
Function:
Array with 10 elements ([0]-[9] below parameter number in display). Press OK and step between
▲ ▼
elements by means of and buttons on the LCP.
Set the minimum limit for each interval in par.23-61
Data . Example: if selecting counter
based on the interval 0 - <12% and
Function:
Select Do reset [1] to reset all values in par.23-61
After pressing OK the setting of the parameter value will automatically change to
Function:
Select Do reset [1] to reset all counters in par.23-62
After pressing OK the setting of the parameter value will automatically change to
MG.11.N1.02 - VLT ® is a registered Danfoss trademark
3 Parameter Description
Date Format , and time format on setting in par.
Continuous Bin Data
[1] and changing setting from 10% to 12%,
counter
[1] on interval 12% - <20%.
Continuous Bin Data .
Timed Bin Data .
3
and par.23-62 Timed Bin
counter [0] will be
Do not reset [0].
Do not reset
[0].
197