Table of Contents
Advertisement
8A-18 Seat Belts:
Seat Belt Height Adjuster Replacement - Front
Callout
Preliminary Procedure
1. Remove the front seat belt adjuster cover.
2. Remove seat belt guide loop bolt. Refer to "Seat Belt Retractor Pretensioner Replacement - Front".
3. Remove the center pillar upper garnish molding. Refer to "Center Pillar Upper Garnish Molding Replacement: ".
Front Seat Belt Height Adjuster Bolt (Qty: 2)
Tip: Apply Permatex® 24200 on all restraint fasteners prior to installation.
Tightening torque
40 N⋅m (30 lb ft).
1
CAUTION
!
Refer to "Fastener Notice: ".
2
Front Seat Belt Height Adjuster Assembly
Component Name
Advertisement
Table of Contents
Troubleshooting
