7A-146 Heating, Ventilation and Air Conditioning:
Callout
Heat Pipes
2
Tip: Reposition heat pipes accordingly to remove.
Auxiliary Blower Control Module Replacement
Callout
Preliminary Procedure
1. Remove the left rear trim panel. Refer to "Rear Quarter Lower Trim Panel Replacement: ".
2. Remove the auxiliary HVAC module mounting bolts (Qty 3). Refer to 07 193 Aux. HVAC Module Replacement
3. Reposition auxiliary HVAC module inward to gain access to the blower control module.
4. Disconnect electrical connection.
Tip: The blower control module is mounted on the outboard side of the module.
Blower control module screws (Qty 2).
CAUTION
!
1
Refer to "Fastener Notice: ".
Tightening torque
1.5 N⋅m (13 lb in)
2
Blower control module.
Component Name
Component Name