Table of Contents
Advertisement
Heating, Ventilation and Air Conditioning:
7A-153
Auxiliary Heating, Ventilation, and Air Conditioning Control Module Programming and
Setup
Each of the following service procedures may require programming or setup procedures to be performed on the
Auxiliary HVAC Control Module or Auxiliary HVAC actuators.
Auxiliary HVAC Control Module Replacement
If the Auxiliary HVAC Control Module is replaced, the following procedure must be performed: Reprogram the Auxiliary
HVAC Control Module. Refer to "Actuator Recalibration".
Auxiliary HVAC Control Module Reprogramming
Do not reprogram the Auxiliary HVAC control module unless directed by a service procedure or a service bulletin.
Reprogram the Auxiliary HVAC Control Module. Refer to "Actuator Recalibration".
Auxiliary Actuator Replacement
If an auxiliary actuator is replaced, the following procedure must be performed: Re-Calibrating Actuators. Refer to
"Actuator Recalibration".
Auxiliary Air Conditioning Evaporator Core Replacement
Advertisement
Table of Contents
Troubleshooting
