7A-104 Heating, Ventilation and Air Conditioning:
Air Conditioning (A/C) Refrigerant Low
Temperature Sensor Replacement
Removal Procedure
1. Remove the I/P compartment. Refer to "Instrument
Panel Compartment Replacement: ".
2. Disconnect the temperature sensor connector from
the temperature sensor.
3. Twist the temperature sensor one quarter turn to
disengage from the evaporator case assembly.
4. Remove the temperature sensor from the evaporator
case assembly.
Installation Procedure
1. Install the temperature sensor to the evaporator case
assembly.
2. Twist the temperature sensor one quarter turn to
engage to the evaporator case assembly.
3. Install the temperature sensor connector to the
temperature sensor.
4. Install the I/P compartment. Refer to "Instrument
Panel Compartment Replacement: ".
Condenser Replacement
Special tool
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to "Refrigerant
Recovery and Recharging".
2. Remove the front fascia. Refer to "Front Bumper
Fascia Replacement: ".
3. Remove the battery box air duct.
4. Remove the condenser radiator fan module (CRFM)
closeout panel.