7A-90 Heating, Ventilation and Air Conditioning:
9. Remove the clutch field coil connector bracket screw
from the compressor.
10. Remove the clutch field coil screws from the
compressor.
11. Remove the clutch field coil from the compressor.
Installation Procedure
1. Clean the clutch field coil and the pulley mounting
surfaces.
2. Install the clutch field coil to the compressor.
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the clutch field coil screws to the compressor.
Tightening torque
Tighten the screws to 4.9 N⋅m (43 lb in).