Table of Contents
Advertisement
7A-138 Heating, Ventilation and Air Conditioning:
Installation Procedure
1. Install the temperature door to the evaporator case
assembly.
2. Assemble the evaporator case halves.
CAUTION
!
Refer to "Fastener Notice: ".
3. Install the screws to retain the evaporator case
halves.
Tightening torque
Tighten the screws to 1.5 N⋅m (13 lb in).
4. Install the mode cam levers (3) to the evaporator
case assembly.
5. Align and install the mode cam (2) to the mode cam
levers (3). Rotate the mode cam (2) to verify mode
door operation.
6. Install the mode cam bracket (1) to the evaporator
case assembly.
7. Install the mode cam bracket screws to the
evaporator case assembly.
Tightening torque
Tighten the screws to 1.5 N⋅m (13 lb in).
8. Install the mode actuator to the evaporator case
assembly.
9. Install the mode actuator screws to the evaporator
case assembly.
Tightening torque
Tighten the screws to 1.5 N⋅m (13 lb in).
10. Install the evaporator case assembly. Refer to "Air
Conditioning (A/C) Evaporator Case Assembly
Replacement".
Advertisement
Table of Contents
Troubleshooting
