Table of Contents
Advertisement
7A-136 Heating, Ventilation and Air Conditioning:
Installation Procedure
1. Inspect the seals, and replace if damaged, using
Kent Industries adhesive backed foam tape P/N
46485 or equivalent.
2. Install the RH defogger duct to the I/P upper trim
panel.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
3. Install the RH defogger duct screws to the I/P upper
trim panel.
Tightening torque
Tighten the screws to 1 N⋅m (9 lb in).
4. Install the instrument panel (I/P) upper trim panel.
Refer to"Instrument Panel Upper Trim Panel
Replacement: ".
Defroster Air Outlet Replacement
Removal Procedure
1. Remove the instrument panel (I/P) upper trim panel.
Refer to "Instrument Panel Upper Trim Panel
Replacement: ".
2. Remove the defroster air outlet screws from the I/P
upper trim panel.
3. Remove the defroster air outlet from the I/P upper
trim panel.
Installation Procedure
1. Inspect the seals, and replace if damaged, using
Kent Industries adhesive backed foam tape P/N
46485 or equivalent.
2. Install the defroster air outlet to the I/P upper trim
panel.
CAUTION
!
Refer to "Fastener Notice: " in Cautions and
Notices.
Advertisement
Table of Contents
Troubleshooting
