Transferring Ob Data - GE LOGIQ 500 Advanced Reference Manual

Operational Setup (cont'd)

Transferring OB Data

.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
Figure 4–15. System Parameters Page 5
Data transfer from the LOGIQ
will only occur while operating in the OB, GYN or Vascular
Exam categories.
The user should input all necessary information into the Patient
Entry Menu. Scan the patient. Measure and calculate all the
desired parameters.
Press Record 1 or Record 2, depending on the key assignment.
Communication with the PC will start by displaying the message:
"Communicating with computer now".
NOTE: Normal system operation is suspended during the
transfer of data.
When all data has been transferred with no errors, the message
"Communication was completed" is displayed.
Refer to the DMC User Manual for processing exam data on the
PC.
Data Management Center (DMC)
500 to the DMC computer (PC)
4–31