GE LOGIQ 500 Advanced Reference Manual page 408

VCR Operating Instructions
Playback with Measurements
.
8–32
Measurements of a frozen VCR playback image are possible.
Press Freeze to stop image acquisition of a VCR playback
image, then press Measurement to activate the measurement
function.
The following measurements of playback images are not
available.
1. Echo-level measurement
2. CFM-point velocity measurement
3. Biopsy guide measurement
4. TAMAX Auto (Auto trace disabled)
To measure the TAMAX value or to take measurements
using the TAMAX value, the TAMAX value must be
obtained using manual trace.
Any measurements other than those above, can be
taken in the same way as measurements of normal
scan images.
Writing comments to a frozen image and display of a
body pattern are available.
Measurement results can also be reported in the same
way as in normal scan.
NOTE: When a VCR playback image is frozen, Cine review is
not available.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0