GE LOGIQ 500 Advanced Reference Manual page 38

3DvieW Mode
Creating a MIP Image Rendering (cont'd)
3–8
The images in Cine Memory between the start and end frames
are the data that will be used for rendering the MIP image. See
Figure 3–5.
Figure 3–5. Images used for MIP
5. Select Render 3D from the Cine Sub-Menu page 3.
Depending on the parameters set in Custom Display pages 9
and 18, the system will take some time to use the selected data
to construct a set of composite images to be displayed as MIP
Image.
6. When the rendering or MIP Image construction is
complete, select Review 3D from the Cine Sub-Menu
page 3 to view the MIP image.
Images to be used for
MIP Image rendering
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0