Measurement Sequences - GE LOGIQ 500 Advanced Reference Manual

Measurement Sequences

Sequence Philosophy
Hints
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
Each of the titles found in the first layer of the cardiac menu
consists of a sequence of measurements. The second layer
Sub-Menu consists of individual measurements/calculations
that can be performed in sequence or individually.
If the measurements are performed in sequence, the display
automatically returns to the first layer menu when all are
complete.
If the second layer Sub-Menu measurements are performed
individually, only those items measured are recorded on the
report page.
The primary philosophy of the cardiac calculation package is for
the user to select an item from the first menu layer. The system
then prompts the user to perform a series of measurements in
sequence. This measurement sequence can be modified by
the user if the factory sequence is not satisfactory.
This operation should not be confused with the Auto Sequence
top menu selection. Items programmed into an auto sequence
can consist of first layer sequences as well as individual
measurements. Together these form a sequence of
measurements and calculations that may be performed
automatically.
If a measurement in a sequence has already been made, it may
be skipped. The system will invoke the next measurement in
the sequence.
Pressing the top of the Ellipse rocker switch skips a
measurement in the sequence.
Pressing the bottom of the Ellipse rocker switch moves back to
measurements previously skipped.
Press the Clear key to quit a sequence at any time. The final
calculation result can not be obtained.
Advanced Cardiac Calculations
4–37