Realtime Doppler Calculations; Realtime Doppler Calculations (Option) - GE LOGIQ 500 Advanced Reference Manual

Realtime Doppler Calculations

Realtime Doppler Calculations (option)

Soft Menu Changes
.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
The ultrasound system has the ability to automatically measure,
calculate and display specific parameters using the Doppler
Auto Trace in realtime. This applies to all exam categories
except GYN and Cardiology with AMCAL option.
Page 4 of the PWD soft menu contains 3 selections that affect
Realtime Doppler Calculations. These are:
PWD Preset Set Up
Realtim Calc
Trace Dir.
OFF Compo
Figure 4–1. PWD Sub-Menu Page 4
S
Realtime Trace:
S
Calc Dir.:
S
Trace Method:
Refer to the Doppler section of the Modes chapter in the Basic
User Manual for details.
NOTE: Trace method selection is important in the
determination of values used to calculate measurement
selections.

Realtime Doppler Calculations

ECG
Trace Dynamic
Method Range
PEAK
30
On, Off or Calc
Forwd, Revrs or Combo
Peak, Mean, Mode, Floor
4–3