Standard Procedure - GE LOGIQ 500 Advanced Reference Manual

3D–Surface Mode

Standard Procedure

3–12
1. To access 3D-Surface Mode, the system should be
active. Press 3D SURFACE from the Cine Sub-Menu
page 4. While in 3D-Surface Mode, measurements
cannot be performed. While 3D-Surface Mode is
active, "3D-Surface" is displayed on the bottom of the
screen.
Archive DICOM Auto Seq
Start Surface
Frame ROI
End Display
Frame Surface
Figure 3–6. Cine Sub-Menu page 4
2. Scan good images for 3D-Surface and press Freeze.
Cine is active.
CINE
Opacity Zoom
Surface
3D
Surface
AUTO
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0