Image Archive - GE LOGIQ 500 Advanced Reference Manual

Image Archive

Send an image to DICOM device
.
Status of DICOM Queued Images
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
If the current selected device is a DICOM printer and the
DICOM printer is configured as Multi format print in the
Destination column, only images with the same patient name
and patient ID can be sent.
The following message is displayed when attempting to send
images with different patient name and/or patient ID to the print
queue:
Different PT Name/ID Print is rejected.
Only B&W or color images can be sent to a DICOM printer. A
combination of the two is not allowed.
The following message is displayed when both B&W and color
images are sent to a B&W or color DICOM printer.
Rejected. Select B&W or color images only.
To send an image to a DICOM device from an Archive Patient
Search Menu.
1. Move the cursor to the image which will be sent.
2. Press the Set key to select the image. If needed,
select multiple images.
3. Move the cursor to the right of the Destination column.
4. Press the Ellipse rocker switch to select the desired
DICOM device.
5. Move the cursor to the Send column.
6. Press the Set key.
NOTE: LZW compressed images cannot be sent to a DICOM
device. If there is an attempt to send a compressed image, the
message "Compressed image cannot be sent." is displayed.
A list of DICOM Queue images can be displayed on the Image
Archive Patient Search Menu, when its status has been
changed to FAIL or COMP in the Queue Status Menu in the
DICOM option. DICOM queued images cannot be locked,
unlocked or deleted at the Image Archive Patient Search Menu.
Storage/Print Option
9–15