GE LOGIQ 500 Advanced Reference Manual page 414

VCR Operating Instructions
Tape Search
.
.
8–38
Pressing Ctrl and T with Ext Video On enables a tape search to
be initiated based on patient information and scan date.
The search conditions are entered by typing in a patient name,
patient ID, scan date, or all three.
(An attempt to conduct a search when no information is
specified for the search conditions causes all patient
information in the hard drive to appear in the list of relevant
patients.)
NOTE: A tape search requires the optional Heading VCR
Playback function.
The tape search function cannot be activated in the scan image
mode.
Entering the search conditions
Use the Trackball or press Return to move the cursor.
1. For a search based on a patient name, enter the
patient name with the cursor in the PT NAME field of
the tape search menu.
2. For a search based on a patient ID, enter the patient ID
with the cursor in the PT ID field of the tape search
menu.
3. For a search based on a scan date, enter a scan date
with the cursor in the DATE field of the tape search
menu.
Pressing Return when the cursor is to the right of the DATE
field begins a search.
NOTE: A search based on a combination of patient name,
patient ID, and scan date is also possible.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0