Growth Trending - GE LOGIQ 500 Advanced Reference Manual

Growth Trending

LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
The default command after the OB Graph is displayed is
TREND–PRESENT. This will display an OB Graph for the
current author/measurement selected.
However, after additional examinations, the user can recall past
data and display it with the current data to show a trend in fetal
growth.
When the user selects the TREND–BOTH command from the
OB Graph display, the system automatically searches the
storage media and gets the data and displays the OB Trend
Graph as shown in Figure 4–4.
Figure 4–4. OB Trend Graph
The system will search for like data displayed on the OB Graph.
If Hadlock BPD is the data displayed, then the current patient's
Hadlock BPD data is used with the past Hadlock BPD data to
display the trend on the graph.
If the user wants to trend different author/measurement data,
that graph must be displayed first before the TREND–BOTH
command is selected.
An asterisk (*) is used to show the present data point on the
graph while the pound sign (+) is used for all past data points.
Fetal Trend Management
4–13