GE LOGIQ 500 Advanced Reference Manual page 444

Storage/Print Option
Multi Frame Transfer (cont'd)
Hints
9–18
S
If there is not enough storage capacity on the hard disk, the
following message is displayed:
"The Image Storage Request queue is full"
S
If the queue has reached its capacity (equivalent to 600
color images), the system does not allow multi-frame
transfers.
S
Multi-Frame Archiving is not supported. Because of the
hardware limitations, the multi-frame image is stored on the
LOGIQ 500 hard disk for the sole purpose of transferring
the multi-frame images to the server.
S
Only the first frame of the multi-frame image is recalled
through the Archive Menu.
S
Only B- or B CFM-Mode multi-frame images can be
transferred.
S
The maximum number of frames in a multi-frame image is
100. The following message is displayed if there are more
than 100 frames:
"This function is not available (>100)".
S
LZW compressed and LOGIQ
from the LOGIQ
700 images will not transfer
500 to a DICOM device.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0