Patient Entry Menu - GE LOGIQ 500 Advanced Reference Manual

Patient Entry Menu

Network Configuration
LOCAL HOST NAME
LOCAL IP ADDRESS
NETMASK
AE TITLE
SERVICE
1.
2.
3.
4.
5.
6.
7.
-. SCHEDULE
[VERIFY MENU]
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç Ç
Figure 9–2. Network Configuration Worksheet
.
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
"Accession No:" is an entry added to each Exam Category
Patient Entry Menu screen for DICOM. It is used to track all
studies for a patient during a single admission or visit.
The Network Configuration Menu is used to set up network
name, ID addresses for the LOGIQ
device(s) and printer(s).
Before filling in the Network Configuration Menu, the following
information should be obtained from the Network System
Administrator.
[NETWORK CONFIGURATION]
:
:
:
:
[ROUTING INFORMATION]
DESTINATION
DEFAULT
. . .
. . .
. . .
[DICOM APPLICATION INFORMATION
DEVICE AE TITLE
[QUEUE MENU]
Message Area
NOTE: It is a good idea to keep this network information
available for future reference.
Storage/Print Option
500 router(s), storage
PORT
GATEWAY
. . .
. . .
. . .
. . .
IP ADDR PORT
. . .
. . .
. . .
. . .
. . .
. . .
. . .
[ EXIT ]
9–3