Storage/Print Option
Record 1 and Record 2 Keys Device Assignments
.
Printer Setup
9–6
The type of device to be controlled by the Record 1 B&W,
Record 1 Color, Record 2 B&W and Record 2 Color preset
selections can be one of the configured DICOM devices. These
presets are avaiable on the Set Up/System Parameters page 5.
Refer to Chapter 14 of the Basic User Manual for details.
If the Record 1 or Record 2 keys are assigned to a DICOM
device that is not a configured device, the following message
appears:
"The DICOM host information is not enough".
The DICOM print function supports a maximum of 16 image
boxes (4x4) on a single sheet of film.
Figure 9–6. Printer Setup Menu
LOGIQ
500 Advanced Reference Manual
2276614–100 Rev. 0